SIGNAGE GUIDES

Infinity Mirror Letter Dimensions: Separate Size from the Tunnel Effect

Request infinity mirror letter dimensions with clear measurement endpoints. Record body size, support footprint and layout separately from the tunnel effect.

Concept illustration of an infinity-mirror letter with a finite outer housing and base beside blank drawing sheets.

An infinity mirror letter can appear to contain a deep illuminated tunnel while its outside dimensions remain unclear in a photograph. The effect reference and the space occupied by the object answer different questions. Approve them in separate records, then connect both to the same proposed letter and drawing revision.

This guide concerns the approximately four-foot freestanding event-letter reference shown on our Infinity Mirror Letters & Numbers product page. That description identifies the reference design, not the final height, width or base dimensions of your order. Use the following dimension sheet to request the actual proposed sizes.

Keep the tunnel effect out of the size column

A front photograph helps communicate the illuminated appearance. It does not establish the outside front-to-back dimension, the complete support footprint or the width of a group of characters. Avoid entries such as “deep tunnel, same as photo” in a dimension request. Those words describe an appearance rather than measurement endpoints.

Keep an effect-reference field for the photograph or demonstration you want to discuss. In a separate physical-size record, identify the surfaces or edges between which each dimension is measured. Ask the manufacturer to mark those endpoints on the proposed front, side or plan view. No apparent tunnel length needs to be converted into a physical cabinet size.

Identify the object before entering a number

Give every character a reference, including repeated letters. For example, A1 and A2 can identify two separate positions in one word; they are illustrative labels, not product model numbers. Record the exact wording, its reading order and the layout revision. A dimension for one character should not silently become a dimension for all characters.

Write the unit on the sheet and on its linked views. If one source uses a different unit, ask for a reconciled drawing rather than copying bare numbers between documents. Also distinguish the letter body from its support. “Height” can mean the character alone or the complete proposed assembly, depending on where the dimension line starts and finishes.

Build a dimension sheet with traceable endpoints

Use this as a blank request template. For every row, add a confirmed value and unit beside the marked dimension line. The source field should contain the actual drawing number, revision and view, not merely “see attachment.” Leave an unanswered entry pending.

On a phone, scroll the worksheet sideways to view all columns.

Size recordEndpoints to markSource to identifyProposed value and unitReview status
Character heightLowest and highest points of the character body; state whether its support is excludedCharacter reference plus front-view drawing and revision[Enter proposed value and unit]Pending / confirmed
Character widthLeftmost and rightmost points of that character bodySame character reference and front view[Enter proposed value and unit]Pending / confirmed
Outside body depthFrontmost and rearmost exterior body surfaces; identify any separate projectionsSide-view drawing and revision[Enter proposed value and unit]Pending / confirmed
Complete support footprintExtreme front, rear and side edges of the proposed base or support assemblyPlan view with the letter body shown in position[Enter proposed value and unit]Pending / confirmed
Complete display layoutOverall assembly width and the separately marked gaps between identified charactersWhole-word layout and revision[Enter proposed value and unit]Pending / confirmed

Add an owner and response date for each pending row. “Confirmed” should mean the proposed value, unit, endpoints and source agree. It should not mean that somebody recognizes the reference photograph. If a quantity does not apply to the proposed construction, request a clear explanation instead of inventing a zero.

Reconcile the character views and the whole-word layout

Check that each character reference on the dimension sheet appears on the complete layout. Read the overall width from the proposed arrangement, including the agreed gaps, rather than multiplying a sample letter width by the number of characters. Different characters and support arrangements can occupy different extents.

Show support projections on the same plan as the bodies. A front elevation can leave an extension toward the viewer invisible. This record describes the proposed object’s occupied dimensions; it does not establish a safe clearance, stability calculation or venue-approved placement. Those questions require the responsible teams to review the actual display and location.

Close size questions without approving the wrong appearance

Keep two explicit decisions: whether the documented physical dimensions are accepted, and whether the identified visual reference represents the appearance you want to pursue. An accepted size does not approve an unspecified lighting effect. An attractive effect demonstration does not close a missing depth or base measurement.

If a later proposal changes a character or support, identify the affected rows and replace their source references. Recheck the complete layout before marking them confirmed again. Keep unanswered questions visible instead of carrying an earlier approval across an altered assembly.

Send a request that can be answered row by row

Adapt this message: “For wording [exact text] and layout [reference/revision], please provide the proposed character dimensions, outside body depth, complete support footprint and whole-display width. Mark the measurement endpoints on matching views, state the unit, and identify any projections separately. Keep the attached effect reference separate from the physical-size confirmation and flag unresolved entries.”

Send HLW SIGN your wording, dimension questions and effect reference, together with the intended display setting and delivery country. Ask which drawing represents the proposed assembly before accepting its dimensions. You can find related preparation guides in our Buyer Resources collection.

WhatsApp Web